實驗室超聲波清洗機是一種高效、環保的清洗設備，廣泛應用于實驗室、科研機構、醫院等場所。正確使用不僅可以延長設備的使用壽命，還能確保實驗結果的準確性和可靠性。

Laboratory ultrasonic cleaning machine is an efficient and environmentally friendly cleaning equipment widely used in laboratories, research institutions, hospitals and other places. Proper use not only extends the service life of the equipment, but also ensures the accuracy and reliability of experimental results.

1、確認清洗物品

1. Confirm cleaning items

在使用前，應確認要清洗的物品是否適合超聲波清洗，如玻璃器皿、金屬零件、寶石等。一些不適合超聲波清洗的物品，如塑料制品、電子元件等，應避免放入清洗機中。

Before use, it should be confirmed whether the items to be cleaned are suitable for ultrasonic cleaning, such as glassware, metal parts, gemstones, etc. Some items that are not suitable for ultrasonic cleaning, such as plastic products, electronic components, etc., should be avoided from being placed in the cleaning machine.

2、檢查設備狀態

2. Check device status

在使用前，應檢查超聲波清洗機是否處于正常工作狀態。檢查內容包括電源線是否完好、插頭是否松動、水箱內是否有水、清洗槽是否干凈等。

Before use, check if the ultrasonic cleaning machine is in normal working condition. The inspection includes checking whether the power cord is intact, whether the plug is loose, whether there is water in the water tank, and whether the cleaning tank is clean.

3、物品擺放

3. Item placement

將待清洗的物品放入清洗槽內，擺放時應注意不要遮擋超聲波振子，以免影響清洗效果。同時，應避免將物品堆疊在一起，以免影響清洗效果和物品的干燥。

Put the items to be cleaned into the cleaning tank, and be careful not to block the ultrasonic oscillator during placement to avoid affecting the cleaning effect. At the same time, items should be avoided from being stacked together to avoid affecting the cleaning effect and drying of the items.

4、加入適量清洗劑

4. Add an appropriate amount of cleaning agent

根據要清洗的物品和污漬情況，加入適量的清洗劑。清洗劑過多會影響超聲波清洗效果，過少則可能導致清洗不徹底。

Add an appropriate amount of cleaning agent according to the items to be cleaned and the situation of stains. Excessive cleaning agent can affect the ultrasonic cleaning effect, while insufficient cleaning agent may lead to incomplete cleaning.

5、啟動設備

5. Start device

將設備插上電源，打開開關，設備開始工作。根據要清洗的物品和污漬情況，選擇合適的清洗時間。一般來說，清洗時間不宜過長，以免對物品造成損害。

Insert the device into the power supply, turn on the switch, and the device will start working. Choose an appropriate cleaning time based on the items to be cleaned and the condition of stains. Generally speaking, the cleaning time should not be too long to avoid damage to the items.

6、觀察清洗過程

6. Observing the cleaning process

設備工作時，觀察清洗過程，注意是否有異常情況出現，如泡沫過多、氣味難聞等。如有異常情況，應立即切斷電源，停止使用，并及時聯系維修人員。

When the equipment is working, observe the cleaning process and pay attention to whether there are abnormal conditions, such as excessive foam and unpleasant smell. If there is any abnormal situation, the power should be immediately cut off, the use should be stopped, and maintenance personnel should be contacted in a timely manner.

更多的關于超聲波清洗機的問題或者詳細的內容，請進入我們公司的網站：http://www.ysjkbx.cn 網站中會有很多的內容僅供參考。

For more questions or detailed information about ultrasonic cleaning machines, please visit our company's website: http://www.ysjkbx.cn There will be a lot of content on the website for reference only.