超聲波清洗機是一種利用高頻振動產生的空化效應來清潔物體表面的設備，廣泛應用于醫療、電子、機械、珠寶等多個行業。其工作原理和使用方法如下：

　　Ultrasonic cleaning machine is a device that uses the cavitation effect generated by high-frequency vibration to clean the surface of objects, and is widely used in multiple industries such as medical, electronics, machinery, jewelry, etc. The working principle and usage method are as follows:

　　一、工作原理

　　1、 Working principle

　　超聲波產生

　　Ultrasonic wave generation

　　換能器：超聲波清洗機的核心部件是換能器（Transducer），它將電能轉換為機械振動。換能器通常由壓電陶瓷材料制成，當施加高頻交流電壓時，會產生高頻振動。

　　Transducer: The core component of an ultrasonic cleaning machine is the transducer, which converts electrical energy into mechanical vibration. Transducers are usually made of piezoelectric ceramic materials, and when high-frequency AC voltage is applied, high-frequency vibrations are generated.

　　頻率范圍：常見的超聲波頻率在20kHz至120kHz之間，其中28kHz和40kHz是最常用的頻率。頻率越高，空化氣泡越小，但能量密度更大，適用于精細清潔；頻率較低時，空化氣泡較大，適合去除較頑固的污垢。

　　Frequency range: The common ultrasonic frequencies are between 20kHz and 120kHz, with 28kHz and 40kHz being the most commonly used frequencies. The higher the frequency, the smaller the cavitation bubbles, but the higher the energy density, which is suitable for fine cleaning; When the frequency is low, the cavitation bubbles are larger and suitable for removing stubborn dirt.

　　空化效應

　　Cavitation effect

　　空化現象：當超聲波傳播到液體中時，會在液體內部產生大量的微小氣泡（即空化氣泡）。這些氣泡在高壓區迅速形成，在低壓區快速膨脹，最終破裂。

　　Cavitation phenomenon: When ultrasonic waves propagate into a liquid, a large number of tiny bubbles (i.e. cavitation bubbles) are generated inside the liquid. These bubbles rapidly form in the high-pressure zone, expand rapidly in the low-pressure zone, and eventually burst.

　　沖擊力：氣泡破裂時會釋放出巨大的局部壓力（可達數千個大氣壓），形成微射流和沖擊波，能夠有效地剝離物體表面的污垢、油脂、銹跡等雜質。

　　Impact force: When bubbles burst, they release enormous local pressure (up to thousands of atmospheres), forming micro jets and shock waves that can effectively remove impurities such as dirt, grease, rust, etc. from the surface of objects.

　　化學反應：空化過程中還會產生局部高溫（約5000°C）和高熱分解產物，促進某些化學反應，進一步增強清潔效果。

　　Chemical reactions: During the cavitation process, local high temperatures (about 5000 ° C) and high thermal decomposition products are also generated, promoting certain chemical reactions and further enhancing the cleaning effect.

　　輔助作用

　　Auxiliary function

　　清洗液：超聲波清洗機通常需要配合專用的清洗液使用。清洗液不僅可以溶解和乳化污垢，還能降低液體的表面張力，使空化氣泡更容易形成和破裂。

　　Cleaning solution: Ultrasonic cleaning machines usually require the use of specialized cleaning solutions. Cleaning solution can not only dissolve and emulsify dirt, but also reduce the surface tension of the liquid, making it easier for cavitation bubbles to form and rupture.

　　溫度控制：適當的加熱可以提高清洗液的活性，加速污垢的溶解和分解。然而，過高的溫度可能會破壞某些敏感材料或導致清洗液揮發過快，因此需要根據清洗對象選擇合適的溫度。

　　Temperature control: Proper heating can increase the activity of the cleaning solution, accelerate the dissolution and decomposition of dirt. However, excessively high temperatures may damage certain sensitive materials or cause the cleaning solution to evaporate too quickly, so it is necessary to choose the appropriate temperature based on the cleaning object.

　　二、使用方法

　　2、 Usage method

　　準備工作

　　preparation

　　選擇合適的清洗液：根據清洗對象的材質和污垢類型，選擇相匹配的清洗液。例如，金屬工件可以使用堿性清洗液，而光學鏡頭則應選擇中性或弱酸性的清洗液。

　　Choose the appropriate cleaning solution: Select a matching cleaning solution based on the material and type of dirt of the cleaning object. For example, alkaline cleaning solution can be used for metal workpieces, while neutral or weakly acidic cleaning solution should be selected for optical lenses.

　　檢查設備：確保超聲波清洗機的電源線、插頭、換能器等部件完好無損，接地良好。定期清理清洗槽，防止殘留物影響清洗效果。

　　Check the equipment: Ensure that the power cord, plug, transducer, and other components of the ultrasonic cleaning machine are intact and well grounded. Regularly clean the cleaning tank to prevent residue from affecting the cleaning effect.

　　準備清洗物品：將待清洗的物品進行初步分類，避免不同材質或形狀的物品混洗。對于精密或易碎物品，可以使用網籃或托架固定，防止碰撞和損壞。

　　Prepare cleaning items: Classify the items to be cleaned preliminarily to avoid mixing items of different materials or shapes. For precision or fragile items, a mesh basket or bracket can be used to secure them to prevent collision and damage.

　　裝入清洗槽

　　Load into the cleaning tank

　　放置物品：將清洗物品放入清洗槽中，注意不要堆疊過高或過于密集，以確保每個物品都能充分接觸到超聲波和清洗液。對于有盲孔或復雜結構的物品，可以適當調整位置，使其各個面都能得到均勻清洗。

　　Placement of items: Place the cleaning items into the cleaning tank, being careful not to stack them too high or too densely, to ensure that each item can fully contact the ultrasonic waves and cleaning solution. For items with blind holes or complex structures, the position can be adjusted appropriately to ensure uniform cleaning on all sides.

　　添加清洗液：按照設備說明書的要求，向清洗槽中加入適量的清洗液，并確保液位高于物品的最高點。如果設備配有加熱功能，可以根據需要設定適當的溫度。

　　Add cleaning solution: According to the equipment manual, add an appropriate amount of cleaning solution to the cleaning tank and ensure that the liquid level is above the highest point of the item. If the device is equipped with a heating function, the appropriate temperature can be set as needed.

　　啟動清洗

　　Start cleaning

　　設置參數：根據清洗對象和污垢程度，選擇合適的超聲波頻率、功率和清洗時間。一般來說，輕度污垢可以選擇較低的功率和較短的時間，而頑固污垢則需要更高的功率和更長的時間。

　　Set parameters: Select the appropriate ultrasonic frequency, power, and cleaning time based on the cleaning object and degree of dirt. Generally speaking, mild dirt can choose lower power and shorter time, while stubborn dirt requires higher power and longer time.

　　啟動設備：按下啟動按鈕，開始超聲波清洗。在此期間，可以觀察清洗槽內的氣泡情況，確保設備正常工作。如有異常聲音或現象，立即停機檢查。

　　Start device: Press the start button to start ultrasonic cleaning. During this period, the bubble situation in the cleaning tank can be observed to ensure the normal operation of the equipment. If there is any abnormal sound or phenomenon, stop the machine immediately for inspection.

　　清洗過程中的注意事項

　　Precautions during the cleaning process

　　避免長時間清洗：雖然超聲波清洗具有高效的特點，但過長的清洗時間可能會對某些敏感材料造成損傷。建議根據實際情況設定合理的清洗周期，并在清洗過程中適時取出物品進行檢查。

　　Avoid prolonged cleaning: Although ultrasonic cleaning is highly efficient, prolonged cleaning time may cause damage to certain sensitive materials. It is recommended to set a reasonable cleaning cycle based on the actual situation and take out items for inspection in a timely manner during the cleaning process.

　　保持通風：如果使用的是含有揮發性溶劑的清洗液，應確保操作環境通風良好，避免吸入有害氣體。

　　Maintain ventilation: If using cleaning solutions containing volatile solvents, ensure good ventilation in the operating environment to avoid inhaling harmful gases.

　　清洗完成后

　　After cleaning is completed

　　取出物品：清洗結束后，關閉設備并取出清洗物品。對于精密或易氧化的物品，可以使用干凈的軟布或壓縮空氣吹干，防止水漬殘留。

　　Remove items: After cleaning, turn off the equipment and remove the cleaning items. For precision or easily oxidizable items, a clean soft cloth or compressed air can be used to dry them to prevent water stains from remaining.

　　清理清洗槽：倒掉清洗液，用清水沖洗清洗槽，清除殘留物。必要時可以使用專用的清潔劑進行深度清潔，保持設備的良好狀態。

　　Cleaning the cleaning tank: Pour out the cleaning solution, rinse the cleaning tank with clean water, and remove any residue. If necessary, specialized cleaning agents can be used for deep cleaning to maintain the good condition of the equipment.

　　維護保養：定期檢查換能器的工作狀態，清理換能器表面的污垢。對于長期不使用的設備，應排空清洗槽內的液體，防止腐蝕和結垢。

　　Maintenance: Regularly check the working condition of the transducer and clean the dirt on the surface of the transducer. For equipment that is not used for a long time, the liquid in the cleaning tank should be emptied to prevent corrosion and scaling.

　　三、常見問題及解決辦法

　　3、 Common problems and solutions

　　清洗效果不佳

　　Poor cleaning effect

　　原因：

　　reason:

　　清洗液不合適或濃度不足。

　　Inappropriate cleaning solution or insufficient concentration.

　　超聲波頻率或功率設置不當。

　　Improper setting of ultrasonic frequency or power.

　　清洗時間過短。

　　The cleaning time is too short.

　　清洗槽內物品堆積過多，影響空化效果。

　　Excessive accumulation of items in the cleaning tank affects the cavitation effect.

　　解決辦法：

　　terms of settlement:

　　更換或調整清洗液的種類和濃度。

　　Replace or adjust the type and concentration of cleaning solution.

　　重新設置超聲波頻率和功率。

　　Reset the ultrasonic frequency and power.

　　延長清洗時間或分批清洗。

　　Extend the cleaning time or wash in batches.

　　減少清洗槽內的物品數量，確保均勻分布。

　　Reduce the number of items in the cleaning tank to ensure even distribution.

　　設備故障

　　equipment failure

　　原因：

　　reason:

　　換能器損壞或接觸不良。

　　The transducer is damaged or has poor contact.

　　加熱元件故障。

　　Heating element malfunction.

　　電源問題或電路板故障。

　　Power supply issue or circuit board malfunction.

　　解決辦法：

　　terms of settlement:

　　檢查換能器的連接線和接頭，必要時更換損壞的換能器。

　　Check the connection wires and connectors of the transducer, and replace damaged transducers if necessary.

　　測試加熱元件，修復或更換故障部件。

　　Test heating elements, repair or replace faulty components.

　　檢查電源線和插頭，排除電路故障。如有必要，聯系專業技術人員進行維修。

　　Check the power cord and plug to eliminate circuit faults. If necessary, contact professional technicians for repairs.

　　噪音過大

　　Excessive noise

　　原因：

　　reason:

　　設備安裝不穩固，產生共振。

　　The equipment installation is unstable, causing resonance.

　　清洗槽內物品與槽壁接觸，產生摩擦聲。

　　The items inside the cleaning tank come into contact with the tank wall, producing a frictional sound.

　　換能器老化或松動。

　　The transducer is aging or loose.

　　解決辦法：

　　terms of settlement:

　　將設備放置在平穩的臺面上，避免晃動。

　　Place the device on a stable surface to avoid shaking.

　　調整清洗物品的位置，確保其與槽壁保持一定距離。

　　Adjust the position of the cleaning items to ensure that they maintain a certain distance from the groove wall.

　　檢查并緊固換能器，必要時更換老化的部件。

　　Check and tighten the transducer, and replace aged components if necessary.

　　四、優勢與局限性

　　4、 Advantages and limitations

　　優勢

　　advantage

　　高效清潔：能夠深入到復雜結構內部和微小縫隙中，徹底清除頑固污漬。

　　Efficient cleaning: capable of penetrating deep into complex structures and tiny gaps, thoroughly removing stubborn stains.

　　溫和無損：不會像傳統刷洗那樣對工件表面造成劃痕或其他物理損傷。

　　Mild and non-destructive: It will not cause scratches or other physical damage to the surface of the workpiece like traditional brushing.

　　節能環保：相比化學溶劑清洗，超聲波清洗減少了有害物質的使用和排放。

　　Energy saving and environmental protection: Compared to chemical solvent cleaning, ultrasonic cleaning reduces the use and emission of harmful substances.

　　適用范圍廣：適用于多種材質和形狀的物品，如金屬、玻璃、陶瓷、塑料等。

　　Wide applicability: Suitable for various materials and shapes of objects, such as metal, glass, ceramics, plastics, etc.

　　局限性

　　limitations

　　不適合軟質材料：如橡膠、塑料等可能會受到超聲波的影響而變形或損壞。

　　Not suitable for soft materials such as rubber and plastic, which may be affected by ultrasonic waves and deform or be damaged.

　　大件物品限制：對于尺寸過大或重量過重的工件，可能需要分批處理或使用大型專用設備。

　　Restrictions on large items: For workpieces that are too large in size or too heavy in weight, they may need to be processed in batches or use large specialized equipment.

　　成本較高：高端超聲波清洗設備價格相對昂貴，且某些專用清洗液也較為昂貴。

　　High cost: High end ultrasonic cleaning equipment is relatively expensive, and some specialized cleaning solutions are also expensive.

　　總結

　　summary

　　超聲波清洗機憑借其高效的清潔能力和廣泛的適用性，在多個行業中得到了廣泛應用。正確理解和掌握其工作原理和使用方法，不僅可以提高清洗效果，還能延長設備的使用壽命，確保安全操作。在實際應用中，應根據具體的清洗需求選擇合適的參數和方法，并定期進行維護保養，以保證最佳的清洗效果。

　　Ultrasonic cleaning machines have been widely used in multiple industries due to their efficient cleaning ability and wide applicability. Correctly understanding and mastering its working principle and usage method can not only improve the cleaning effect, but also extend the service life of the equipment and ensure safe operation. In practical applications, appropriate parameters and methods should be selected according to specific cleaning needs, and regular maintenance should be carried out to ensure the best cleaning effect.

　　本文由 超聲波清洗機 友情奉獻.更多有關的知識請點擊 http://www.ysjkbx.cn    真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待

　　This article is a friendly contribution from an ultrasonic cleaning machine For more related knowledge, please click http://www.ysjkbx.cn Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon